1-6
Workstation 5 Field Service Guide
Introduction to the WS5 FRUs
System Board and Components
See chapter 3 for more information about recovering the WEPOS image.
•
USB Flash Drive, 256M - P/N 700901-020
256M USB Flash Drive is pre-loaded with the Windows Embedded CE 6.0
operating system, platform files and the CAL client utility. Installs on
system board header J9. Not compatible with the Workstation 4 LX System
Board.
•
IC, BIOS ROM, WS5 - P/N 100111-011
The pre-programmed 1M BIOS ROM installs in system board socket U36.
Not compatible with the Workstation 4 or Workstation 4 LX.
•
Compact Flash Daughter Card - P/N 400373-101
The CF Daughter Card attaches to IDE1 the CF Riser Socket on the
Workstation 5 System Board. Does not include CF Card, cover and
mounting screws. Also compatible with the KWS4, PCWS 2010, the
Workstation 4 and Workstation 4 LX.
•
Compact Flash Cards - See Figure 1-2
Blank formatted Compact Flash Card in sizes of 256M, 512M, 1GB, and
2GB. The 256M CF is standard for Windows CE, but a WEPOS unit ships
without a CF card installed. Compatible with all CF based MICROS
workstations.
•
DIMM, DDR333 256M - P/N 700502-175
DDR3 DIMM suitable for Windows Embedded CE 6.0. Approved devices
include Wintec WD1UN256X808-333B-PH,
WD1UN256X808-333B-PJ-M01, and Unigen
UG732D6688KV-DHFMSS. Also compatible with the Workstation 4 LX.
Please note that the Windows Embedded CE image is limited to 512M of
RAM.
•
DIMM, DDR333 512M - P/N 700502-173
Suitable for WEPOS configurations. Wintec part numbers include
WD1UN512X808-333B-QC and WD1UN512X816-333B-PJ-M01.
•
DIMM, DDR333, 1GB - P/N 700502-174
Suitable for WEPOS configurations. Wintec Part Number
WD1UN01GX816-333C-QC.
•
Battery, CR2032 - P/N 7000043-005
CR2032 Lithium Coin Cell. This battery is also used on the WS4, WS4
LX, PCWS 2010, PCWS Eclipse and KWS4 System Boards.
