4-4
Workstation 5 Field Service Guide
Remove and Replace the Workstation 5 FRUs
Disassembling the Workstation 5
6.
With the LCD/Touchscreen assembly positioned to the right side of the
base, remove the system board interface cables.
o
The standard resistive touchscreen configuration is shown on the left
side of Figure 4-3, below. Remove the LCD Data Cable from J8, the
Backlight Inverter cable from J3, and the Resistive Touchscreen ribbon
cable from J6.
Figure 4-3: Removing the LCD/Touchscreen Cables
o
The optional capacitive touchscreen configuration is shown on the right
side of the illustration. Remove the LCD Data Cable from J8, the
Backlight Inverter Cable from J3, and the Capacitive Interface Board
Cable from J5.
To replace the Mag Card Reader assembly, see page 4-5.
To replace the power supply board, see page 4-7.
To replace the Touchscreen Glass, LCD Panel or Backlight Inverter Board,
refer to page 4-8.
To remove and replace the Workstation 5 System Board, see page 4-17.
To remove and replace the integrated LCD Customer Display, See page 4-26.
Resistive
Capacitive
