Micros Systems Workstation 4 Service Manual Download Page 118

Page: 118 / 226

3-32

Workstation 4 and 4 LX Field Service Guide

WS4 Troubleshooting
Workstation 4 Diagnostic Utility

•

MSR Config File added. See page 3-35 for more information.

•

The Windows CE desktop wall paper states “4.2 Eng Build 14.6 (GR 2.1)”

GR 2.2 Platform Software

•

Required to support WS4 System Board ABRD36, but compatible with older
revisions.

•

Windows CE Compatible screen saver introduced.

•

The Windows CE desktop wall paper states “4.2 Eng Build 14.9 (GR 2.2).”

GR 2.3 Platform Software

•

Added alternate character sets for the LCD Customer Display.

•

ddi_gx_sharp.inf values adjusted for the Sharp LG41 LCD.

•

CAL Package Upgrade.

•

The Windows CE desktop wallpaper states EngPlatform4.2, v12.97, RC15.2,
GR2.3.

GR2.3a Platform Software

•

Modified the \doc\lxvideo_sharp.inf file to support the Sharp LG61 LCD Panel.

The illustration below displays an example of the WS4 System Information screen
with the Platform Software fields highlighted. Figure 3-6. A brief description of each
highlighted filed can be found below.

Figure 3-6: The System Information Screen (Software Platform GR 2.3a)

Diagnostics Version

This field displays the WS4 Diagnostics Utility Software Version. Version 1.90
first appeared in GR 1.2 and continues through the GR 2.3 platform.

Summary of Contents for Workstation 4



































































































































































































































Search results

Summary of Contents for Workstation 4

Reviews:

Related manuals for Workstation 4

Brands by name

Popular brands

Micros Systems Workstation 4, Service Manual

Search results

Summary of Contents for Workstation 4

Reviews:

Related manuals for Workstation 4

Brands by name

Popular brands