manualshive.com logo in svg

Micros Systems Workstation 4, Service Manual

The Micros Systems Workstation 4 is a versatile and advanced computing solution for businesses. Our comprehensive Setup Manual is available for free download at manualshive.com, ensuring hassle-free installation and smooth operations. Enhance productivity with this user-friendly manual, providing step-by-step instructions and valuable insights for optimal utilization.

Share
Download
background image

 3-30 

Workstation 4 and 4 LX Field Service Guide

WS4 Troubleshooting
Workstation 4 Diagnostic Utility

RAM Space Available

This field displays the amount of available RAM, located in the single DIMM 
installed on the system board. 

CF Space Available

This field displays the space available on the CF Card. The value displayed on 
your WS4 will not always agree with that shown. Figure 3-6 displays the available 
space on a factory 128M CF card before the POS application and support files are 
installed. Over the life of the WS4, CF card sizes of 32M, 64M, 128M and 256M 
were used.

CF Serial Number

This field displays the CF Card serial number. The number displayed is derived 
from the Volume Serial Number assigned to the card when the Windows File 
System format is applied by the manufacturer of the CF card.

DOC Space Available

This field displays the free space available on the Disk On Chip. All units ship 
with a 32M device. Unlike the values shown in the RAM or CF Space Available 
fields, the value displayed in this field will be consistent across most workstations. 
This is because the DOC contains the WinCE operating system, software utilities 
such as the CAL, and all platform files.

Physical Address

This field displays the network Media Access Control (MAC) number assigned to 
the system board Ethernet Controller at the factory. Each workstation will display 
a unique value in this field in the form 00a0a4xxxxxx.

Motherboard Serial Number

This field displays a 19-digit serial number created at the time the system board is 
manufactured. The number is stored in a serial EEPROM. Each workstation will 
display a unique value in this field.

Summary of Contents for Workstation 4



































































































































































































































Reviews:

No comments

Related manuals for Workstation 4

EBN Technology POS50A-5B-LX800 User Manual preview
POS50A-5B-LX800
Brand: EBN Technology Pages: 37
ANZ multiPos Operating Instructions Manual preview
multiPos
Brand: ANZ Pages: 108
Unitech Tashi MT680-AMWTAG User Manual preview
Tashi MT680-AMWTAG
Brand: Unitech Pages: 35
Moneris e355 Quick Install Manual preview
e355
Brand: Moneris Pages: 25
Pilz PMI v704e Operating Manual preview
PMI v704e
Brand: Pilz Pages: 39
NetPay Spire SPc5 Manual preview
Spire SPc5
Brand: NetPay Pages: 25
Nokia G-010G-A Quick Reference Manual preview
G-010G-A
Brand: Nokia Pages: 3
Nokia G-010G-T Quick Reference Manual preview
G-010G-T
Brand: Nokia Pages: 3
Nokia 30 GSM At Command Manual preview
30 GSM
Brand: Nokia Pages: 114
Nokia DNT2Mi mp Operating Instructions Manual preview
DNT2Mi mp
Brand: Nokia Pages: 128
Nokia 7368 ISAM ONT G-240W-C Product Manual preview
7368 ISAM ONT G-240W-C
Brand: Nokia Pages: 146
National Instruments FieldPoint FP-TB-10 Operating Instructions Manual preview
FieldPoint FP-TB-10
Brand: National Instruments Pages: 22
Ier 680 User Manual preview
680
Brand: Ier Pages: 12
3M 4588IPT Series Instructions Manual preview
4588IPT Series
Brand: 3M Pages: 8
POSIFLEX JIVA EL Series User Manual preview
JIVA EL Series
Brand: POSIFLEX Pages: 28
UTC RETAIL 3170 Series Installation Manual preview
3170 Series
Brand: UTC RETAIL Pages: 9
UTC RETAIL 2200 Series Installation Manual preview
2200 Series
Brand: UTC RETAIL Pages: 12
PAR EverServ 600 User Manual preview
EverServ 600
Brand: PAR Pages: 11

Brands by name

Popular brands

Load more brands