Micromeritics GEMINI VII, Operator'S Manual

Page: 101 / 253

Field or Button Description
Insert Range. Specifies the starting and ending quantities adsorbed
and number of points to insert.
Load Table. Imports values from another file.
Save Table. Saves the current table as a .QNT file.
Apply. Applies all table changes.
Heat of adsorption plot
[
selection ]
Generates the Heat of Adsorption data in a graphical format.
Isostere plot [ selection ]
Generates a graph showing quantities of gas adsorbed versus the
temperature.
Remove Sample
[
button ]
Removes the selected sample from the list.
Show graphic
[
check box ]
Use to show a graphic on the report header.
Height/Width. Enter the height and width of the selected graphic.
These values determine the graphic appearance on the generated
report.
Show report title
[
check box ]
Select then enter a report title to appear on the report header.
Tabular report
[
check box ]
Generates a tabular report of the included samples that contains the
numeric values contributed by each sample.
For fields and buttons not listed in this table, see Common Fields and But-
tons on page 2 - 2 .
Heat of Adsorption Report (continued)
Heat of Adsorption Report
Gemini VII Operator Manual
239-42828-01 (Rev H ) — May 2021
6 - 9