![background image](http://html1.mh-extra.com/html/micromeritics/accupyc-1330/accupyc-1330_operators-manual_1787657056.webp)
Calibration Data
Press
to display or edit calibration data.
Display
Entry
Press
until
Calibration data is
displayed. Then press
.
When the pycnometer is calibrated, cell volume and expansion volume
are updated automatically.
Enter the cell volume and press
.
Range:
0.01 to 999.0000 cm
3
Enter the expansion volume and press
.
Range:
0.5 to 999.0000 cm
3
The temperature offset is pre-set at the
factory and is entered on the Calibration
Sheet shipped with the instrument. It should
not be changed unless the battery-backed
RAM is reinitialized.
If battery-backed RAM is reinitialized, enter
the value from the calibration sheet and
press
.
Range:
0 to 100.00
°
C
2
Set up type?
Calibration data
CHOICE
ENTER
Cell volume:
(value from calibration)
ENTER
Expansion volume:
(value from calibration)
ENTER
Temperature offset:
(pre-set value)
ENTER
Editing the Setup Parameters
AccuPyc 1330
4-24
September 1996
Summary of Contents for AccuPyc 1330
