Micromeritics AccuPyc 1330, Operator'S Manual

Page: 54 / 115

Report Options
Press to display or edit report options.
Display Entry
Press until Report options is
displayed. Then press .
Select the mode, either density or volume,
in which the analysis report will be
displayed, then press
Both density and volume will be shown on the printed report, but density
will be correct only if sample weight was entered.
A sample ID is a unique identifier of the
sample. It can contain from 1 to 20
numbers or dashes.
Using sample IDs can help you keep track
of data from various analyses.
For example, you can use the sample ID as
a date and time stamp.
Select either yes or no, then press .
Select the format of data to be used when
transmitting reports. Refer to Appendix D
for a description of the formats.
Choices: Single column, Spreadsheet
Select the destination of the report that is
automatically generated after an analysis or
calibration, then press
.
Choices: display, printer, transmission line.
2
Set-up type?
Report options
CHOICE
ENTER
Anls display mode?
Density
ENTER
Request sample ID?
Yes
ENTER
Transmission format?
Single column
Report destination?
Display
ENTER
Editing the Setup Parameters AccuPyc 1330
4-22 September 1996