Micromeritics AccuPyc 1330, Operator'S Manual

Page: 59 / 115

Unit Types, Operating Language, Date, and Time
Press to display or edit unit types, operating language, date,
or time.
Display Entry
Press until Unit types is displayed.
Then press .
Select either psig (pounds-per-square-inch
gauge) or kPag (kilopascal gauge), then
press
.
Select the desired language, then press
.
Choices:English, Deutsch, Español,
Francais, or Italiano
If there are error messages in the message queue (indicated by an aster-
isk next to the Reload prompt, delete the messages before changing lan-
guages. Refer to Error, Report, and System Status Messages in Chapter
4. Make sure you press SAVE after changing languages.
The date is included in all printed and
transmitted reports. If the date shown is
incorrect, you may enter the correct date as
follows: day/month/year. Note that each
entry must contain two digits.
For example, to enter September 1, 1992,
enter 01/09/92 and press
.
The key is used to enter a slash (/).
2
Set up type?
Unit types
CHOICE
ENTER
Pressure Units?
psig
ENTER
Language?
English
ENTER
Date (DD/MM/YY)
(pre-set date)
ENTER
•
AccuPyc 1330 Editing the Setup Parameters
September 1996 4-27