Micromeritics AccuPyc 1330, Operator'S Manual

Page: 12 / 115

Table 1-2. Key Combinations
Function Keys Used To
ZERO Zero the pressure transducer.
CALIBRATE Calibrate the pycnometer.
MANUAL Manually control the valves. After
pressing the Manual key, you may
use the FILL, EXPAND, and VENT
commands to open and close the
valves.
SET UP Display or edit analysis parameters,
report options, calibration data, data
transmission parameters, unit types,
operating language, and date and
time.
TRANSMIT Transmit analysis or calibration data
over the serial line. If an automatic
operation is in progress, transmit a
partial report.
ESCAPE Delete all data entered in the
current mode and return to display
mode. If an automatic operation is
in progress, cancel the operation.
ANALYZE Perform an analysis.
REVIEW Review or edit completed analysis
or calibration data.
PRINT Print analysis or calibration report.
If an automatic operation is in
progress, print a partial report.
FILL
(when in
manual
mode)
Open and close the fill valve. The
indicator above the FILL key is on
when the valve is open and off
when the valve is closed.
EXPAND
(when in
manual
mode)
Open and close the expansion valve.
The indicator above the EXPAND
key is on when the valve is open
and off when the valve is closed.
VENT
(when in
manual
mode)
Open and close the vent valve. The
indicator above the VENT key is on
when the valve is open and off
when the valve is closed.
0
•
1
2
3
CLEAR
4
5
6
7
8
9
Equipment Description AccuPyc 1330
1-6 September 1996