Metz Cosmo Series, Operating Instructions Manual

Page: 337 / 399

69
17.7 Connecting headphones
The headphone jack is located on the side.
Wireless headphones can also be connected to the " AUDIO OUT port " on the back of the TV.
The sound settings for the radio headphones should then be set as described on page 64.
We recommend headphones with impedance that is not less than 32 Ω. For headphones
with less impedance (approx. 8 Ω), the dynamic range is smaller.
Setting the volume too high when using headphones or earphones can result in
damage to the ears - including the complete loss of hearing.
17.8 Sound 1, Sound 2
In dual channel programs, you can switch from Sound 1 to Sound 2
• Press the yellow
key.
• Select "Audio track" with the cursor.
• Use the cursor to make desired changes to the sound settings.
Headphone connec-
tion Ø 3,5 mm
Sound output
Audio out
Ø 3.5mm stereo jack