Metz Cosmo Series, Operating Instructions Manual

Page: 323 / 399

55
16.2.1 Adjusting the signal for a programme
The settings in the "Signal adjustment" menu are optimised for the picture settings and
should not be changed. If the settings in the "Signal-contr..." menus are changed, this will
usually lead to a deterioration in picture quality.
It is recommended that changes only be made if an AV device (such as a video recorder) is
connected and does not generate a satisfactory image.
Setting signal adjustment:
• Press button to open the "Functional overview".
• Select "Menu" with the cursor and press the button.
• Select "Picture" with the cursor and press the button.
• Select "Signal adjustment" with the cursor in the context menu and press the button.
• Select "Signal-contr..." with the cursor in the context menu and press the button.
• Set the desired setting with the cursor and press the button.
• Press the button to exit the menu.
EXIT
Radio Portal PVR Archive TV
Functional overview 20:10
Music Photos Videos
Analogue Network USB HDMI
Filemanager Remove USB Device Manual
Parental control
Menu
Autom. On/Off
■ MANUAL
Network AV devices Sound Picture
Menu 20:10
Radio station list
TV station list
Subtitle Service
Parental control Recordings/EPG
Configuration
Terrestrial Analog-TV Cable
Satellite
■ MANUAL
OK
OK
OK
Picture
O
PERATION LEVEL
H H H
Picture settings, general
Pict.set.,prog.posn.
Picture profile adjustment
BACK
Color intens. 60%
Picture profile gen. (Standard)
MPEG noise reduction gen.(medium)
Noise reduction gen.(Automatic)
Picture format
Auto.mode
Picture sharpness
Signal adjustment
Signal-Offset 70
■ MANUAL ■ EXPERT ■ COMFORT ■ SIMPLE
Signal adjustment
Signal-contr... 70%
Picture
EXIT
Pict.set.,prog.posn.