Metz Cosmo Series, Operating Instructions Manual

Page: 292 / 399

24
9.5 Setting the SAT system, antenna system
The TV set must be configured for the SAT antenna system in the "DVB-S" menu.
Please ensure that the antenna connection is correct (Chap. 4.1)
Antenna system
Normal
For a standard satellite system with an antenna line.
Single arial (single cable distribution SDC)
With the "Single cable" setting, the DVB-S receivers have one feed line. The channel
selection is preset according to the structural conditions of the satellite system.
No antenna control signals can be sent over the feed line.
Unicable/JESS
The antenna system with a channel router feeds one cable and is designed to receive the full
channel selection. For this purpose, each receiver is assigned one specific frequency in the
satellite frequency range (950-2150 MHz). The channel router has multiple fixed frequencies
(SCR-Freq.) saved in a frequency bank,
the SCR number and the SCR frequency must match;
see the instruction manual for the channel router.
Radio Portal PVR Archive TV
Functional overview 20:10
Music Medie Player Photos Videos
Analogue Network USB HDMI
Filemanager Remove USB Device Manual
Parental control
Menu
Autom. On/Off
■ MANUAL
Network AV devices Sound Picture
Menu 20:10
Radio station list TV station list
Subtitle Service
Parental control Recordings/EPG
Terrestrial Analog-TV
Cable Satellite
■ MANUAL
OK
OK
Configuration
OK
Satellite
O
PERATION LEVEL
H H H
DVB-T
BACK
Aerial facility
Astra 19,2°
Hot Bird 13°
Automatic search
Manual search
General settings
Antenna normal
Power compensation Aus
LNB supply voltage Ein
DiSEqC System Off
■ MANUAL ■ EXPERT ■ COMFORT ■ SIMPLE
EXIT
Aerial facility DVB-S
Satellite
Antenna normal
Single aerial
Unicable
JESS
normal