Metz Cosmo Series, Operating Instructions Manual

Page: 330 / 399

62
17.2.2 Sound settings for programme position
The sound setting, as it was made in Section 17.1.7 for all programs can be changed here
for a single program location. On presets that offer a mixed program, that speech and music
share in mixed form, we recommend the "Auto. mode" setting.
It is recommended to use the "Language" setting for programme positions that normally
broadcast language programmes (such as news), for instance N-TV, etc. The effect strength
for the language emphasis can be adjusted in 10 increments for the "Language" setting.
The “Auto. mode” setting dynamically adjusts Tone settings by analysing the signal while a
programme is being broadcast.
The setting “normal” is recommended for music playback.
Setting tone:
• Press button to open the "Functional overview".
• Select "Menu" with the cursor and press the button.
• Select "Sound" with the cursor and press the button.
• Select "Sound set., prog. posn." and "Tone settings" with the cursor in the context menu
and press the button.
• Set the desired setting with the cursor and press the button.
• Press the button to exit the menu.
EXIT
Radio Portal PVR Archive TV
Functional overview 20:10
Music Photos Videos
Analogue Network USB HDMI
Filemanager Remove USB Device Manual
Parental control
Menu
Autom. On/Off
■ MANUAL
Network AV devices Sound
Menu 20:10
Radio station list TV station list
Picture
Subtitle Service
Parental control Recordings/EPG
Configuration
Terrestrial Analog-TV
Cable Satellite
■ MANUAL
EXIT
OK
OK
OK
Sound
O
PERATION LEVEL
H H H
Sound settings, general
Sound set., prog. posn.
BACK
Volume corr. 0
■ MANUAL ■ EXPERT ■ COMFORT ■ SIMPLE
Sound set., prog. posn.
Sound
Tone settings Speech
gen.
normal
Auto. mode