Metz Cosmo Series, Operating Instructions Manual

Page: 296 / 399

28
9.5.4 Set SAT system, selecting a satellite
Up to four satellites can be set in the “DVB-S” menu if “DiSEqC” is switched on.
The LNB frequency serves as toggle switch for the frequency band (high band - low band).
The standard factory settings are low band 9.75 GHz and high band 10.60 GHz.
Setting additional satellites:
• Press button to open the "Functional overview".
• Select "Menu" with the cursor and press the button.
• Select "DVB-S" with the cursor and press the button.
• Select the desired satellite in the context menu with the cursor and press the button.
If your satellite system is equipped to receive signals from two satellites, then you also
have to configure the second satellite.
• Press the button to exit the menu.
• Select "Low band" or "High band" with the cursor. The settings depend on the compo-
nents used of the satellite system. Please consult the data sheet or sticker of the LNB(s)
used for the settings required.
• Confirm the settings by pressing the button.
• Close "Menu" by pressing the button.
EXIT
EXIT
Radio Portal PVR Archive TV
Functional overview 20:10
Music Photos Videos
Analogue Network USB HDMI
Filemanager Remove USB Device Manual
Parental control
Menu
Autom. On/Off
■ MANUAL
Network AV devices Sound Picture
Menu 20:10
Radio station list TV station list
Subtitle Service Parental control Recordings/EPG
Terrestrial Analog-TV Cable Satellite
■ MANUAL
OK
OK
Configuration
OK
Satellite
O
PERATION LEVEL
H H H
DVB-T
BACK
Aerial facility
Astra 19,2°
Hot Bird 13°
Automatic search
Manual search
Satellit
Low-Band 9,75 GHz
High-Band 10.60 GHz
■ MANUAL ■ EXPERT ■ COMFORT ■ SIMPLE
EXIT
Astra 19,2°
DVB-S
Satellite
Satellite Astra 19,2°
Astra 28,2°
Hot Bird 13°
Eutelsat 10°
Eutelsat 16°
Eutelsat 7°
Eutelsat 36°
Sirius 5°
Astra 19,2°