Merging Anubis Premium, User Manual

Page: 59 / 138

59
ANUBIS EQ GUIDELINES
Important: The Monitor EQ are supported as of Anubis Firmware 1.1.8 and higher.
New Anubis EQ for Monitors
The Anubis EQ is built on the existing and universally acclaimed quality of the Pyramix EQ-X and
offers Extreme definition filtering at sampling frequencies up to DXD.
This new EQ support for Monitors is a twelve band fully parametric EQ with independent control
of filter type, gain boost and cut, frequency, and Q factor (bandwidth) for each band. With notch,
low cut, Hi Cut, peak and shelving filter types available. The state space filter design of this
extreme definition equalizer has been specifically optimized to deal with the highest audio
resolutions while still permitting very low noise & distortion, typically offering a THD+N of better
than -110dB, throughout the entire audible (and even non-audible) range. Of course, this new
digital filter's topography, while designed with high sample rate in mind, also offers the extra
benefits and low noise to 1FS equalization.
EQ can be applied to any monitors type (speakers set, headphones and cues). In case of speaker
set, multiple speakers set having the same routing with different equalization can be set. In that
situation the EQ resources are not cumulated but shared. This allow a complex equalization for
each speaker set (max total of 56 bands for each speaker set)