Merging Anubis Premium, User Manual

Page: 55 / 138

55
MONITORS
Configure your Monitoring sets, whether you plan to use the Anubis hardware output sets for
your Studio Monitor Speaker, Headphones, Cue Mix or to Remotely control the outputs of an
external compatible device RAVENNA/AES67 (e.g. Horus or Hapi).
Monitor entry page details
Note: Use the arrow up or down to move a Monitor to a new ordering position. This feature is available
as of Firmware 1.1.x and higher.
Create new Monitor
Create a new Monitor set that can be customized for your needs.
For example configure the Anubis Main (1-2) outputs to control the volume of your DAW Source
through the Anubis Monitoring Engine.
>
Enter a Monitor configuration by tapping the Monitor line or Monitor Name
Select to delete a Monitor set upon confirmation in message dialog
Enable or disable a Monitor
Disabling a Monitor will hide this one from the Main Anubis menu pages. Doing so will not delete
the Monitor but simply hide it with a gray icon
it can be enabled back at any time.