Merging Anubis Premium, User Manual

Page: 125 / 138

125
10. Wait for the upload and update to complete. Notice that your Anubis TFT will also display the
progression of the update.
Warning . Never abort the Firmware when it is updating, this could damage the Anubis configuration.
11. Once the Firmware update is completed please reboot your Anubis. You can do this from either the
browser or the ANUBIS TFT, by selecting “Reboot Device”
12. You should now be on the latest Firmware. You can verify the Firmware version of your Anubis by
opening the Info page (Long press Home button) and navigate to Settings>Info
In case you cannot access the Anubis Maintenance mode.
Make sure that Anubis is well connected to your system, it is mandatory that the Ethernet port or Switch is
a Gigabit one.
Under the Anubis>Settings>Info page take note of the written IP Address (ideally be set to Auto IP on both
your Anubis and Network Interface card).
Type the Anubis address in your Chrome browser followed by :8080 Example: 169.254.182.31:8080
You could also just open the Anubis web access page and add the :8080 at the end of the IP address,
follow by pressing enter.
You should now have access to the Anubis Maintenance page and be able to update your Anubis firmware.
Warning : Users needing to rollback from a 1.1.x firmware to a previous 1.0.x Firmware must first rollback to
the Anubis Firmware 1.0.20b43451 and from there rollback to older 1.0.x F irmware’s if needed.