70
The TALKS settings have similarities to the Sources settings.
Enable: Enable or disable the Talk sources
Name: Select the Talk name from the pre-defined naming listing
Trim: Apply a trim value to the Talk source
Patch: Patch the Talk source, you can choose the local Built-in Mic, any Anubis input where you
would connect a Microphone or an AoIP Stream that could be a Microphone connected to
another RAVENNA/AES67 compliant device.
Apply Dim to all SpeakerSet: When enabled if the talkback is engaged it will Dim the SpeakerSet
levels to the configured Dim level configured under Settings>Monitoring>Monitors>
MONITOR-
NAME
>Talkback Sources Dim value. This setting can be configured for each Speaker Set, in order
to have different Dim levels applied when engaging the Talkback.
Triggers
The operator can define how the Talkback is triggered, that can be from either Anubis Talk
Button or from GPI (footswitch), a trigger can engage multiple Talkbacks at a time. Refer to the
GPIO Settings for more details.
Figure 7 Example: Patching the Anubis Built-in microphone and using the Anubis Talk button as the Trigger
INPUTS
Settings
Split channel settings. The Anubis AD front-end topology offers the split channel functionality,
where every input channel has a separate split gain control for sending them to different paths.
Enable the Split channel option for the Anubis Preamps channels pair of your choice. The Anubis
XLR Combo 1/2 inputs or the Jack 3/4 inputs.
Summary of Contents for Anubis Premium
