135
Firmware takes a long time to
update, and the update button
is not always showing
Browser issue with
Safari
It is not recommended to use Safari for the Firmware update as it is
known to cause slowdown at update and potentially the Update
button might not be seen.
Merging recommends that you perform your Firmware update using
Google Chrome. If you still encounter issue try using a Chrome
Incognito Tab for the update.
Cannot perform some
functions on my Monitors set
(such as DownMix, Ref/Dim,
Speaker selection…).
Anubis Monitor
Types
Anubis has 3 types of Monitor sets
1) Speaker Set
2) Headphones
3) Cues
Each one of the Monitor types have their own characteristics and
features. Make sure select the right one. Consult the Monitoring
Mission section and table for all details.
Cannot have different Source
trims for each Monitor set
Anubis Monitoring
Mission has global
sources trims.
With the Anubis Monitoring mission each Source has a trim that is
global and applied to all Monitor set. A workaround is to create a
second source routed to the desired Monitor set and trim this one to a
given level.
Individual sources trim per Monitor set is planned for the upcoming
Music Mission.
“no ASIO Host connected” in
Merging Ravenna ASIO Panel
DAW configuration
Make sure your DAW is running and set to use the Merging Ravenna
ASIO driver.
On some Media Players software, the playback must be started for
the application to run its ASIO hosting.
Remote Preamps: Some
parameters such as Boost,
Link and Cut cannot be
controlled from ProTools
Not supported in
Avid's remote
Preamps
protocol
Boost: Remote MIDI Preamps control does not support the Anubis
Boost Preamps option. It will be interpreted as a Pad. For the moment
it is recommended to set this parameter locally on the Anubis
Preamps.
Link and Cut: Remote MIDI-Preamps control do not support the
Anubis Link nor Cut Preamps options.
Users can use Stereo Inputs to control 2 Anubis inputs
simultaneously, or use the Link locally on the Anubis.
The Cut option will need to be used locally as this parameter is not
supported by the Avid MIDI Preamps protocol.
Cannot see all Monitor sets in
ANEMAN
Limitation
Only the selected Monitor set is displayed in ANEMAN.
Cannot trim the Sources level
differently in each Monitor set
Monitor Mission
Design
Source Trims are global and not individual to each Monitor set.
Workaround: If you wish to have independent Source trims levels for
different Monitors is it recommended to duplicate the Sources and
use Cue monitors, so that each Cues have a different selection of
Sources.
Summary of Contents for Anubis Premium
