Merging Anubis Premium, User Manual

Page: 9 / 138

9
Product Regulatory Compliance
Product Safety and EMC Compliance
Merging Technologies ANUBIS is designed, tested and verified to comply with the following Safety & EMC regulations
FCC
– Radiated and Conducted Emissions (USA).
CFR 47 Part 15 – Radiated and Conducted Emissions (Canada).
CISPR 22:2008 (class B) – Radiated and Conducted Emissions (International).
CISPR 32:2012 (class B) – Radiated and Conducted Emissions (International).
CISPR 24:2010 – Immunity (International).
EN 55022:2010 (class B) – Radiated and Conducted Emissions (European Union).
EN 55032:2012 (class B) – Radiated and Conducted Emissions (European Union).
EN 55024:2010 – Immunity (European Union).
EN61000-3-2 & -3 – (Power Harmonics and Fluctuation and Flicker).
Electromagnetic Compatibility Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2), this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to
operate the equipment. The customer is responsible for ensuring compliance of the modified product.
Only peripherals (computer input/output devices, Ethernet switches, terminals, printers, etc.) that comply with FCC
Class B limits may be attached to this computer product. Operation with noncompliant peripherals is likely to result in
interference to radio and TV reception.
All cables used to connect to peripherals must be shielded and grounded. Operation with cables, connected to
peripherals that are not shielded and grounded, may result in interference to radio and TV reception.
Environmental Limits
System Office Environment Parameter Limits
Operating Tempe5 degrees C to +45 degrees C with the maximum rate of change not to exceed 10 degrees C
per hour.
Non-Operating Temperature -40 degrees C to +70 degrees C
Non-Operating Humidity 95%, non-condensing @ 30 degrees C
Operating Shock No errors with a half sine wave shock of 2G (with 11-millisecond duration).
Package Shock Operational after a free fall, 60 cm depending on the weight.
ESD 8kV per Merging Technologies Environmental Test Specification