Merging Anubis Premium, User Manual

Page: 50 / 138

50
Set the date 24-Hours format by tapping each field (Hours: Minutes: Seconds) one by one and
using the Anubis Rotary Knob to adjust.
Note: The Date and Time changes will be saved once you exit the Anubis Settings or if you Save the
current configuration from Settings>Exit>Save
METERS Settings
Hot (PCM)
Sets the metering level Hot range (white). If set to 0dB this will mean clipping.
Range -2dBFS to 0dBFS
Default: -0.2dBFS
Note: When reaching a level of 0dBFS (digital clipping) the meter top led will display a Red peak.
Hot (DXD/DSD)
Sets the metering level Hot range (white). If set to 0dB this will mean clipping.
Range: -2dB to +6dB SACD
Default setting: +2.8dB SACD
Reminder: DSD users benefit from a +6dB headroom in DSD with distortion starting slightly and
progressively from 3.1dB upwards and clipping once re6dB SACD.
Alignment (reference level)
Sets the metering level Alignment range (light-gray).
Range -24dBFS to 0dBFS
Default: -18dBFS
Decay Integration Time
Sets the rate at which the level meter display decays after the level falls below the most recent
Peak.
Choices: OFF - 25 ms/dB - 50 ms/dB - 75 ms/dB - 100 ms/dB
Default: 25ms/dB
Peak Hold
Enabling Peak Hold allows the meter to continue displaying the highest signal level permanently,