Mercury Cougar 2000 Owner'S Manual Download Page 62

Page: 62 / 281

Controls and features

Fast forward/reverse

Press and hold

SEEK or SEEK

to search backwards or forwards

across the tracks on the disc.

Scan mode

Press the SCAN button. Each track

is played in turn for a short period.
During this scan, SCAN" appears

in the display. To continue listening

to a track, press SCAN.
Pressing SCAN at any time will end

the scan.

To end CD playback

Press the AM/FM button to restore

radio reception without ejecting the

disc. If reselected, the CD will start

from wherever playback was last

interrupted.
A square in the display indicates

there is a disc inserted.

CD eject

During CD playback, press

When ejected, the disc is held

ready for removal. If it is left as it

is, the disc will be pulled back

inside the audio unit automatically,

and retained ready for playback.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands