Mercury Cougar 2000 Owner'S Manual Download Page 54

Page: 54 / 281

Controls and features

Fade/Balance control

Press FADE/BAL" once for fade

(front to rear) or twice for balance

(left to right), and use the volume

control for sound system

adjustment. The display indicates

the level selected.
The fade function is applicable to

vehicles with front and rear

speakers only.

Seek tuning control (SEEK)

During radio reception, press

to locate the next station down

or up the waveband selected.

Scan tuning control

Press the SCAN button. The radio

tunes to and plays the next station

on the waveband. After a short

period it tunes to and plays the

next station.
During this scan, SCAN" appears

in the display.
If you wish to continue listening to

a station tuned to, press SCAN.
Pressing SCAN at any time will end

the scan.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands