Mercury Cougar 2000 Owner'S Manual Download Page 115

Page: 115 / 281

Seating and safety restraints

114

6. Within seven seconds of the

Safety belt

warning light turning

off, buckle then unbuckle the safety

belt.

•

This will disable Belt Minderif it

is currently enabled, or enable Belt

Minder if it is currently disabled.
7. Confirmation of disabling Belt

Minderis provided by flashing the

Safety belt

light fourtimes per

second forthree seconds.
8. Confirmation of enabling Belt

Minderis provided by flashing the

Safety belt

light fourtimes per

second forthree seconds, followed

by three seconds with the

Safety

belt

light off, then followed by

flashing the

Safety belt

light four

times persecond forthree seconds

again.
9. After receiving confirmation, the

deactivation/activation procedure is

complete.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands