Mercury Cougar 2000 Owner'S Manual Download Page 45

Page: 45 / 281

Controls and features

Setting memory preset stations

1. Select the frequency band with

the AM/FM select control.
2. Select a station. Refer to

Tune

adjust

Seek function

for more

information on selecting a station.
3. Press and hold a memory preset

control until the sound returns,

indicating the station is held in

memory on the control you

selected.

Autoset memory preset

Autoset allows you to set strong

radio stations without losing your

original manually set preset

stations. This feature is helpful on

trips when you travel between

cities with with different radio

stations.

Starting autoset memory preset

1. Select a frequency using the

AM/FM select controls.
2. Press the AUTO control.
3. When the first six strong

stations are filled, the station

stored in memory preset control 1

will start playing.
If there are less than six strong

stations available on the frequency

band, the remaining memory preset

controls will all store the last strong

station available.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands