Mercury Cougar 2000 Owner'S Manual Download Page 131

Page: 131 / 281

Seating and safety restraints

130

SAFETY SEATS FOR CHILDREN

RearĆfacing child seats or

infant carriers should never

be placed in the front seats.

Carefully follow all of the

manufacturer's instructions

included with the safety seat you

put in your vehicle. If you do not

install and use the safety seat

properly, the child may be injured

in a sudden stop or collision.

Child and infant or child safety
seats

Use a safety seat that is

recommended for the size and

weight of the child. The best fit can

be obtained with a child safety seat

that has a base wide enough to

span the depression of the rear seat

so that it rests on the highest part

of the seat cushion. Carefully follow

all of the manufacturer's

instructions with the safety seat

you put in your vehicle. If you do

not install and use the safety seat

properly, the child may be injured

in a sudden stop or collision.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands