Mercury Cougar 2000 Owner'S Manual Download Page 55

Page: 55 / 281

Controls and features

Band selector (AM/FM)

•

Press repeatedly during radio

reception to select AM, FM1, FM2

or AutoStore (see

). The display indicates the

selection made.

•

Press during tape or CD playback

to return to radio reception.

AutoStore selector

AutoStore selects six strong FM

station signals and stores them on

the preset buttons.

•

Press and hold the AM/FM button

to activate AutoStore.

•

AST" flashes in the display while

the unit searches through the FM

frequencies.

•

When the search is complete,

sound is restored on preset

button 1.

•

Other stored stations can be

selected using the other preset

buttons.

•

Alternatively, AutoStore can be

used as an additionalwaveband to

store other stations manually (see

Station preset buttons).

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands