Mercury Cougar 2000 Owner'S Manual Download Page 193

Page: 193 / 281

Maintenance and care

192

Precautions when servicing
your vehicle

Be especially careful when

inspecting orservicing yourvehicle.

Here are some general precautions

foryoursafety:

•

Do not work on a hot engine.

The cooling fan is automatic

and may come on at any

time. Always disconnect the

negative terminal of the battery

before working near the fan.

•

If you must work with the engine

running, avoid wearing loose

clothing orjewelry that could get

caught in moving parts. Take

precautions with long hair.

•

Do not work on a vehicle with the

engine running in an enclosed

space, unless you are sure you have

enough ventilation.

•

Keep all lit cigarettes, open

flames and otherlit material away

from the battery and all fuel related

parts.
If you disconnect the battery, the

engine must relearn" its idle

conditions before your vehicle will

drive properly, as explained under

in this chapter.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands