Mercury Cougar 2000 Owner'S Manual Download Page 43

Page: 43 / 281

Controls and features

Seek function in CD mode

Press

to seek the previous track

of the current disc.
Press

to seek forward to the

next track of the current disc. After

the last track has been completed,

the first track of the current disc

will automatically replay.

Scan function

The scan function works in radio,

tape orCD mode.

Scan function in radio mode

Press the SCAN control to hear a

brief sampling of all listenable

stations on the frequency band.

Press the control again to stop the

scan mode.

Scan function in tape mode

Press the SCAN control to hear a

short sampling of all selections on

the tape. (The tape scans in a

forward direction. At the end of the

tape's first side, direction

automatically reverses to the

opposite side of the tape.) To stop

on a particular selection, press the

control again.

Scan function in CD or CD
changer mode (if equipped)

Press the SCAN control to hear a

short sampling of all selections on

the CD. (The CD scans in a forward

direction, wrapping back to the first

track at the end of the CD.) To stop

on a particular selection, press the

control again.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands