Mercury Cougar 2000 Owner'S Manual Download Page 151

Page: 151 / 281

Driving

150

Vehicles equipped with an

automatic transaxle are equipped

with a brakeĆshift interlock feature

that prevents the gearshift lever

from being moved from the

P (Park) positionunless the brake

pedal is depressed.

Putting your vehicle in gear

You must push the thumb buttonto

move the gearshift to the position

you choose.

To operate:

1. Start the engine.

2. Depress and hold the brake

pedal.

3. Move the gearshift lever out of

P (Park).

Overriding the brake-shift
interlock feature

If you cannot move the gearshift

lever from P (Park) with the brake

pedal depressed:
1. Turnthe ignitionoff and remove

the ignition key.
2. Apply the parking brake and the

brake pedal.
3. Insert a screwdriver or similar

item about 5 cm (2 inches) into the

square opening to the right of the

gearshift at the base of the console.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands