Mercury Cougar 2000 Owner'S Manual Download Page 235

Page: 235 / 281

Maintenance and care

234

If other than Ford, Motorcraft or

Ford authorized parts are used for

maintenance replacements or for

service of components affecting

emissions control, such nonĆFord

parts should be equivalent to

genuine Ford Motor Company parts

in performance and durability.

Do not park, idle, or drive

your vehicle in dry grass or

other dry ground cover. The

emission system heats up the

engine compartment and exhaust

system, which can start a fire.

Watch for fluid leaks, strange odors,

smoke, loss of oil pressure, engine

overheating, illumination of the

charging system" warning light or

the check engine" warning light.

These events could indicate that

the emission control system is not

working properly.

Exhaust leaks may result in

the entry of harmful and

potentially lethal fumes into the

passengercompartment.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands