Mercury Cougar 2000 Owner'S Manual Download Page 14

Page: 14 / 281

Instrumentation

Charging system

Illuminates when the ignition is

turned on and the engine is off. The

light also illuminates when the

battery is not charging properly and

the vehicle may require electrical

system service.

Engine oil pressure

Illuminates when the ignition is

turned on and the engine is off. The

light also illuminates when engine

oil pressure falls below the normal

range when the engine is running.

Referto the

Maintenance and

care

chapterto check the engine

oil level as soon as possible. If the

engine oil level is correct and the

light remains illuminated, do not

start the engine. See yourdealeror

a qualified service technician.

Brake system warning

Extinguishes when the parking

brake is released. Illuminates after

releasing the parking brake to

indicate low brake fluid level or

that the Electronic Brake

Distribution system (part of the

ABS) requires service. The vehicle

is equipped with one of two lights,

depending on the market.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands