Mercury Cougar 2000 Owner'S Manual Download Page 46

Page: 46 / 281

Controls and features

These stations are temporarily

stored in the memory preset

controls (until deactivated) and are

accessed in the same manner of

your original presets.
To deactivate autoset and return to

your audio system's maually set

memory stations, press the AUTO

control again.

Bass adjust

The bass adjust control allows you

to increase or decrease the audio

system's bass output.
Press the BASS control then press:

•

to decrease the bass output

and

•

to increase the bass output.

Treble adjust

The treble adjust control allows you

to increase or decrease the audio

system's treble output.
Press the TREB control then press:

•

to decrease the treble output

and

•

to increase the treble output.

Speaker balance adjust

Speaker sound distribution can be

adjusted between the right and left

speakers.
Press the BAL control then press:

•

to shift sound to the left and

•

to shift sound to the right.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands