Mercury Cougar 2000 Owner'S Manual Download Page 105

Page: 105 / 281

Seating and safety restraints

104

BELT AND RETRACTOR

ASSEMBLY MUST BE

REPLACED if the seat belt

assembly TellĆTale Label" (if

applicable, located on lap portion

at outboard side of seat above

anchorage point) is activated and

states that the retractor assembly

is required to be replaced, or the

seat belt assembly automatic

lockingretractor" feature or any

other seat belt function is not

operatingproperly when checked

accordingto the procedures in the

Service Manual.

Failure to replace the Belt and

Retractor assembly could increase

the risk of injury in collisions.

Using safety restraints properly

Combination lap and shoulder
belt

To fasten, insert the tongue into

the slot in the buckle until you hear

it snap and feel it lock.
To unfasten, push the release

button and remove the tongue from

the slot.
The safety restraints in the vehicle

are combination lap and shoulder

belts. The front and rear seat

passenger safety belts have two

types of lockingmodes.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands