Mercury Cougar 2000 Owner'S Manual Download Page 107

Page: 107 / 281

Seating and safety restraints

106

Automatic locking mode

In this mode, the shoulderbelt is

automatically prelocked. The belt

will still react to remove any slack

in the shoulderbelt.
The automatic locking mode is not

available on the driver's safety belt.

When to use the automatic
locking mode

•

When a tight lap and shoulder

belt fit is desired.

•

a child safety seat is

installed in the vehicle. For

information on the proper use of a

child safety seat, refer to

Safety

seats for children

laterin this

chapter.

Using automatic locking mode

The automatic locking mode must

be used when installing a child

safety seat in any passengerseat.
1. Buckle the combination lap and

shoulderbelt until you hearit snap

and feel it lock.
2. Grasp the shoulder belt portion

and pull downward until the entire

belt is extracted.
3. Allow the belt to retract. As the

belt retracts, you will hear a

clicking sound. This indicates that

the safety belt is now in the

automatic locking mode.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands