Mercury Cougar 2000 Owner'S Manual Download Page 63

Page: 63 / 281

Controls and features

CD care and maintenance

For best possible sound quality, use

CDs that are clean and in good

condition.

CD error codes

Codes may be shown in the audio

unit display that indicate errors

with the CD unit. These codes are

as follows:

Display

Description/rectification

E11 or E15

Internal fault, see your dealer.

E12

Clean the disc and try again. If error still shows, see your

dealer.

E14

Ambient temperature too hot - unit will not work until it

has cooled down.

E16

There is an eject fault, see your dealer.

CD Changer

Refer to the section

CD changer

MENU button (main features) –
CD

Use the MENU button to access

main menu features, and the SEEK

button for adjustment.

Summary of Contents for Cougar 2000


























































































































































































































































































Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands

Mercury Cougar 2000, Owner'S Manual

Search results

Summary of Contents for Cougar 2000

Reviews:

Related manuals for Cougar 2000

Brands by name

Popular brands