Mercury 2003 Owner'S Manual Download Page 96 | Manualshive

Page: 96 / 265

background image

The parking lamps will flash once when all doors/hood/liftgate and
liftgate window are closed indicating the vehicle is locked and entering
the 20 second countdown.

DISARMING THE SYSTEM

You can disarm the system by any of the following actions:

•

Unlock the doors by using the

on the remote entry transmitter.

•

Unlock the doors by using your keyless entry pad.

•

Unlock the driver’s door with a key. Turn the key full travel (toward
the front of the vehicle) to make sure the alarm disarms.

•

Turn ignition to ON.

•

Press the

on the remote entry transmitter. This will only shut off

the horn and parking lamps when the alarm is sounding. The alarm
system will still be armed.

•

Press the liftgate window control on the remote entry transmitter. The
liftgate and liftgate window are no longer armed, but the doors and
hood are still armed. To disarm the doors and hood, press the liftgate
power door lock control.

Pressing the power door UNLOCK trim switch within the 20 second
prearmed mode will return the vehicle to a disarmed state.

TRIGGERING THE ANTI-THEFT SYSTEM

The armed system will be triggered if:

•

Any door, the liftgate, liftgate window or hood is opened without using
the door key, keypad or the remote entry transmitter.

Power door lock disable feature

This feature disables the power door locks and liftgate power door lock
control switches if all doors are closed and the perimeter alarm becomes
armed.

Once the locks are disabled, they only become active when the perimeter
alarm is disarmed or a door, liftgate, liftgate window or hood is open.

Locks and Security

95

«
...
94
95
96
97
98
...
»

Summary of Contents for 2003










































































































































































































































































Reviews:

No comments

Related manuals for 2003

Brand: Camcar Pages: 6

Brand: ABL Pages: 4

Brand: Chevrolet Pages: 2

Brand: Rola Pages: 3

Porsche 911 GT3 R

Brand: iRacing Pages: 25

Wireless Handsfree Car Kit

Brand: Wagan Pages: 20

Brand: Oldsmobile Pages: 2

Brand: Vauxhall Pages: 131

Brand: Hyundai Pages: 11

Brand: Honda Pages: 124

Brand: Subaru Pages: 540

Brand: Kia Pages: 58

Brand: Ranger design Pages: 22

Brand: IOGear Pages: 38

Brand: Prime Design Pages: 12

Brand: Chevrolet Pages: 46

HOLLANDIA 700 - 20 Series

Brand: Webasto Pages: 30

Brand: Ford Pages: 264

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands