Mercury 2003 Owner'S Manual Download Page 19

Page: 19 / 265

Press the DSP control again to access the occupancy modes. Use the
SEL control to optimize the sound based upon the occupants in the
vehicle.

The following occupancy modes can be selected:

•

ALL SEATS

•

DRIVER SEAT

•

REAR SEATS

Mute:

Press to MUTE playing

media; press again return to playing
media

Eject:

Press to eject a CD. Press

and hold to eject all loaded discs.

Bass:

Press BASS; then press

SEL

to decrease/increase

the bass output.

Treble:

Press TREB; then press

SEL

to decrease/increase

the treble output.

Select:

Use with Bass, Treble,

Balance and Fade controls to adjust
levels.

Balance:

Press BAL; then press

SEL

to shift sound to the

left/right speakers.

Fade:

Press FADE; then press

SEL

to shift sound to the

rear/front speakers.

Entertainment Systems

Summary of Contents for 2003










































































































































































































































































Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands

Mercury 2003, Owner'S Manual

Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands