manualshive.com logo in svg

Mercury 2003, Owner'S Manual

The Mercury 2003 Quick Reference Manual is a comprehensive user manual designed to provide quick and easy guidance for operating the Mercury 2003 model. With clear instructions and helpful illustrations, this manual is available for free download from our website manualshive.com, ensuring efficient usage and hassle-free navigation.

Share
Download
background image

Driver and passenger dual-stage air bag supplemental restraints

The dual-stage air bags offer the capability to tailor the level of air bag
inflation energy. A lower, less forceful energy level is provided for more
common, moderate-severity impacts. A higher energy level is used for
the most severe impacts. Refer to

Air bag Supplemental Restraints

section in this chapter.

Front crash severity sensor

The front crash severity sensor enhances the ability to detect the
severity of an impact. Positioned up front, it provides valuable
information early in the crash event on the severity of the impact. This
allows your Personal Safety System to distinguish between different
levels of crash severity and modify the deployment strategy of the
dual-stage air bags and safety belt pretensioners.

Driver’s seat position sensor

The driver’s seat position sensor allows your Personal Safety System to
tailor the deployment level of the driver dual-stage air bag based on seat
position. The system is designed to help protect smaller drivers sitting
close to the driver air bag by providing a lower air bag output level.

Front safety belt usage sensors

The front safety belt usage sensors detect whether or not the driver and
front outboard passenger safety belts are fastened. This information
allows your Personal Safety System to tailor the air bag deployment and
safety belt pretensioner activation depending upon safety belt usage.
Refer to

Safety Belt

section in this chapter.

Front safety belt pretensioners

The safety belt pretensioners are designed to tighten the safety belts
firmly against the occupant’s body during a collision. This maximizes the
effectiveness of the safety belts and helps properly position the occupant
relative to the air bag to improve protection. The safety belt
pretensioners can be either activated alone or, if the collision is of
sufficient severity, together with the air bags.

Front safety belt energy management retractors

The front safety belt energy management retractors allow webbing to be
pulled out of the retractor in a gradual and controlled manner in
response to the occupant’s forward momentum. This helps reduce the
risk of force-related injuries to the occupant’s chest by limiting the load
on the occupant. Refer to

Safety Belt

section in this chapter.

Seating and Safety Restraints

109

Summary of Contents for 2003










































































































































































































































































Reviews:

No comments

Related manuals for 2003

Gardigo MARTEN-FREE CAR Instruction Manual preview
MARTEN-FREE CAR
Brand: Gardigo Pages: 36
Quadratec QR3 Installation Manual preview
QR3
Brand: Quadratec Pages: 8
OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
Gator GX5HDKT User Manual preview
GX5HDKT
Brand: Gator Pages: 8
Dacia 2014 Sandero Driver'S Handbook Manual preview
2014 Sandero
Brand: Dacia Pages: 238
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
Simplicity 1694286 Installation Instructions Manual preview
1694286
Brand: Simplicity Pages: 10
Webasto Telestart T70 Installation Instructions Manual preview
Telestart T70
Brand: Webasto Pages: 23
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
Charge Amps Halo Pole Mount Manual preview
Halo Pole Mount
Brand: Charge Amps Pages: 14
Safe Fleet RVS-218629 Instruction Manual preview
RVS-218629
Brand: Safe Fleet Pages: 28
GMC ACADIA 2017 Getting To Know Your preview
ACADIA 2017
Brand: GMC Pages: 20
PAC RadioPRO4 Manual preview
RadioPRO4
Brand: PAC Pages: 5
Kia Magentis Owner'S Manual preview
Magentis
Brand: Kia Pages: 211

Brands by name

Popular brands

Load more brands