Mercury 2003 Owner'S Manual Download Page 18

Page: 18 / 265

AUDIOPHILE IN-DASH SIX CD SOUND SYSTEM

Seek:

Works in radio ro CD

mode. Press and release
SEEK

for previous/next

strong station or track.

Rewind:

In CD mode, press to

reverse the CD

Fast forward:

In CD mode, press

until desired selection is reached.

COMP

(Compression): The compression feature operates in CD mode

and brings soft and loud CD passages together for a more consistent
listening level. Press the COMP control until COMP ON is displayed.

DSP

(Digital Signal Processing if equipped): Press to enter DSP mode.

Press SEL to select teh desired signal modes, (i.e., JAZZ CLUB, HALL,
CHURCH or STADIUM).

DSP ambiance (if equipped):

This feature gives the feeling of “being

there” to your music, creating increased clarity as well as an open and
spacious feel to the music. Press DSP to access the ambiance menu.
Press SEL to engage/disengage.

Turn the volume control to increase/decrease the level of ambiance.

Entertainment Systems

Entertainment Systems

Summary of Contents for 2003










































































































































































































































































Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands

Mercury 2003, Owner'S Manual

Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands