manualshive.com logo in svg

Mercury 2003, Owner'S Manual

The Mercury 2003 Quick Reference Manual is a comprehensive user manual designed to provide quick and easy guidance for operating the Mercury 2003 model. With clear instructions and helpful illustrations, this manual is available for free download from our website manualshive.com, ensuring efficient usage and hassle-free navigation.

Share
Download
background image

Adding engine oil

1. Check the engine oil. For instructions, refer to

Checking the engine

oil

in this chapter.

2. If the engine oil level is not within the normal range, add only certified
engine oil of the recommended viscosity. Remove the engine oil filler cap
and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the
MAX hole on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise
1/4 of a turn or until three clicks can be heard.

To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level indicator and/or the engine oil filler cap removed.

Engine Oil Recommendations

4.6L Engine

Look for this certification
trademark.

SAE 5W-20 engine oil is recommended.

Only use oils “Certified For Gasoline Engines” by the American
Petroleum Institute (API). Use Motorcraft or an equivalent oil meeting
Ford Specification WSS-M2C153–H.

SAE 5W-20 oil provides optimum

fuel economy and durability performance meeting all
requirements for your vehicle’s engine

.

Change your engine oil and filter according to the appropriate schedule
listed in the scheduled maintenance guide.

Do not use supplemental engine oil additives, oil treatments or engine
treatments. They are unnecessary and could, under certain conditions,
lead to engine damage which is not covered by your warranty.

Maintenance and Specifications

215

Summary of Contents for 2003










































































































































































































































































Reviews:

No comments

Related manuals for 2003

GARO TWIN+ Assembly Instructions / End User Instruction preview
TWIN+
Brand: GARO Pages: 23
GARO LS4 Wallmounted Operational Instructions preview
LS4 Wallmounted
Brand: GARO Pages: 15
Vauxhall MOVANO Owner'S Manual preview
MOVANO
Brand: Vauxhall Pages: 177
Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
Boyo VTL17LTJ Manual preview
VTL17LTJ
Brand: Boyo Pages: 9
Metra Electronics 99-7860 Installation Instructions preview
99-7860
Brand: Metra Electronics Pages: 5
Renkforce RF-4743771 Operating Instructions preview
RF-4743771
Brand: Renkforce Pages: 4
GARO Wallbox GLB Quick Start Manual preview
Wallbox GLB
Brand: GARO Pages: 15
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
ICON 91824E Installation Instructions preview
91824E
Brand: ICON Pages: 4
Rhino-Rack S400-FK2 Instructions preview
S400-FK2
Brand: Rhino-Rack Pages: 2
Saab 2007 9-7X Owner'S Manual preview
2007 9-7X
Brand: Saab Pages: 498
Rajant 23-100068-001 Quick Start Manual preview
23-100068-001
Brand: Rajant Pages: 11
Ranger design C24-DL Installation Manual preview
C24-DL
Brand: Ranger design Pages: 14
Erich Jaeger 735229 Installation Instructions Manual preview
735229
Brand: Erich Jaeger Pages: 16
Jeep 2018 GRAND CHEROKEE User Manual preview
2018 GRAND CHEROKEE
Brand: Jeep Pages: 372
Volkswagen Zubehör 2H5 055 202 A Fitting Instructions Manual preview
2H5 055 202 A
Brand: Volkswagen Zubehör Pages: 40

Brands by name

Popular brands

Load more brands