manualshive.com logo in svg

Mercury 2003, Owner'S Manual

The Mercury 2003 Quick Reference Manual is a comprehensive user manual designed to provide quick and easy guidance for operating the Mercury 2003 model. With clear instructions and helpful illustrations, this manual is available for free download from our website manualshive.com, ensuring efficient usage and hassle-free navigation.

Share
Download
background image

Driving while you tow

When towing a trailer:

•

Turn off the speed control. The speed control may shut off
automatically when you are towing on long, steep grades.

•

Consult your local motor vehicle speed regulations for towing a trailer.

•

To eliminate excessive shifting, use a lower gear. This will also assist
in transmission cooling. (For additional information, refer to the

Driving with a 5–speed automatic transmission

section in this

chapter.

•

Under extreme conditions with large frontal trailers, high outside
temperatures and highway speeds, the coolant gauge may indicate
higher than normal coolant temperatures. If this occurs, reduce speed
until the coolant temperature returns to the normal range. Refer to

Engine coolant temperature gauge

in the

Instrument cluster

chapter.

•

Anticipate stops and brake gradually.

•

Do not exceed the GCWR rating or transmission damage may occur.

Servicing after towing

If you tow a trailer for long distances, your vehicle will require more
frequent service intervals. Refer to your scheduled maintenance guide for
more information.

Trailer towing tips

•

Practice turning, stopping and backing up before starting on a trip to
get the feel of the vehicle trailer combination. When turning, make
wider turns so the trailer wheels will clear curbs and other obstacles.

•

Allow more distance for stopping with a trailer attached.

•

If you are driving down a long or steep hill, shift to a lower gear. Do
not apply the brakes continuously, as they may overheat and become
less effective.

•

The trailer tongue weight should be 10–15% of the loaded trailer
weight.

•

After you have traveled 80 km (50 miles), thoroughly check your
hitch, electrical connections and trailer wheel lug nuts.

•

To aid in engine/transmission cooling and A/C efficiency during hot
weather while stopped in traffic, place the gearshift lever in P (Park).

•

Vehicles with trailers should not be parked on a grade. If you must
park on a grade, place wheel chocks under the trailer’s wheels.

Driving

161

Summary of Contents for 2003










































































































































































































































































Reviews:

No comments

Related manuals for 2003

Federal Signal Corporation 7000 Assembly Instructions Manual preview
7000
Brand: Federal Signal Corporation Pages: 13
Axxess AX-AM-AU92 Installation Instructions Manual preview
AX-AM-AU92
Brand: Axxess Pages: 8
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
Fortin Evo All THAR-FOR3 Installation Manual preview
Evo All THAR-FOR3
Brand: Fortin Pages: 7
Safe Fleet PRIME DESIGN VBI-FT21B Manual preview
PRIME DESIGN VBI-FT21B
Brand: Safe Fleet Pages: 12
Honda Plusone Console 4521011B User Information preview
Plusone Console 4521011B
Brand: Honda Pages: 4
Mercedes-Benz CLS 2015 Operator'S Manual preview
CLS 2015
Brand: Mercedes-Benz Pages: 398
BraunAbility Rampvan Maintenance And Service Manual preview
Rampvan
Brand: BraunAbility Pages: 46
MBRP 0130717 Assembly preview
0130717
Brand: MBRP Pages: 5
Metra Electronics 99-6510 User Manual preview
99-6510
Brand: Metra Electronics Pages: 17
Jacob Jensen Electronic Parking Disc 3 User Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 17
Thule Follow me RAPID INTRACKER Fitting Instructions Manual preview
Follow me RAPID INTRACKER
Brand: Thule Pages: 8
NavLinkz RL4-LR16-8 Manual preview
RL4-LR16-8
Brand: NavLinkz Pages: 26
Chevrolet Express 2004 Owner'S Manual preview
Express 2004
Brand: Chevrolet Pages: 406
CAME UNIPARK ARK1 Manual preview
UNIPARK ARK1
Brand: CAME Pages: 14
Thule 1325 Kit Instructions Manual preview
1325 Kit
Brand: Thule Pages: 8
Maserati MC20 2022 Owner'S Manual preview
MC20 2022
Brand: Maserati Pages: 288
DV8 LPBR-02 Installation Manual preview
LPBR-02
Brand: DV8 Pages: 4

Brands by name

Popular brands

Load more brands