manualshive.com logo in svg

Mercury 2003, Owner'S Manual

The Mercury 2003 Quick Reference Manual is a comprehensive user manual designed to provide quick and easy guidance for operating the Mercury 2003 model. With clear instructions and helpful illustrations, this manual is available for free download from our website manualshive.com, ensuring efficient usage and hassle-free navigation.

Share
Download
background image

It is important to note the box in the lower left corner of the window
sticker. These numbers represent the Range of L/100 km (MPG)
expected on the vehicle under optimum conditions. Your fuel economy
may vary depending upon the method of operation and conditions.

EMISSION CONTROL SYSTEM

Your vehicle is equipped with various emission control components and a
catalytic converter which will enable your vehicle to comply with
applicable exhaust emission standards. To make sure that the catalytic
converter and other emission control components continue to work
properly:

•

Use only the specified fuel listed.

•

Avoid running out of fuel.

•

Do not turn off the ignition while your vehicle is moving, especially at
high speeds.

•

Have the items listed in your scheduled maintenance guide performed
according to the specified schedule.

The scheduled maintenance items listed in the scheduled maintenance
guide are essential to the life and performance of your vehicle and to its
emissions system.

If other than Ford, Motorcraft or Ford-authorized parts are used for
maintenance replacements or for service of components affecting
emission control, such non-Ford parts should be equivalent to genuine
Ford Motor Company parts in performance and durability.

Do not park, idle, or drive your vehicle in dry grass or other dry
ground cover. The emission system heats up the engine

compartment and exhaust system, which can start a fire.

Illumination of the “Check Engine” light, charging system warning light
or the temperature warning light, fluid leaks, strange odors, smoke or
loss of engine power, could indicate that the emission control system is
not working properly.

Exhaust leaks may result in entry of harmful and potentially
lethal fumes into the passenger compartment.

Do not make any unauthorized changes to your vehicle or engine. By
law, vehicle owners and anyone who manufactures, repairs, services,
sells, leases, trades vehicles, or supervises a fleet of vehicles are not

Maintenance and Specifications

234

Summary of Contents for 2003










































































































































































































































































Reviews:

No comments

Related manuals for 2003

Jeep Wrangler 2011 Owner'S Manual preview
Wrangler 2011
Brand: Jeep Pages: 603
Jeep Patriot 2011 User Manual preview
Patriot 2011
Brand: Jeep Pages: 80
Front Runner Easy-Out Fitting Instructions preview
Easy-Out
Brand: Front Runner Pages: 5
TrailFX A4012S Installation Instructions Manual preview
A4012S
Brand: TrailFX Pages: 6
Yuasa SmartShot Automatic 12V 1.5 Amp 5 Stage Technical Manual preview
SmartShot Automatic 12V 1.5 Amp 5 Stage
Brand: Yuasa Pages: 44
UAZ 2001 ???-3741 Instruction Manual preview
2001 ???-3741
Brand: UAZ Pages: 112
Pacbrake HP10098 Installation Manual preview
HP10098
Brand: Pacbrake Pages: 6
BMW 51 47 0 027 792 Installation Instructions Manual preview
51 47 0 027 792
Brand: BMW Pages: 7
Ford 2007 Navigator (Spanish) Owner'S Manual preview
2007 Navigator
Brand: Ford Pages: 728
Westin 58-53935 Installation Instructions preview
58-53935
Brand: Westin Pages: 5
KEKO K162 Installation Instructions Manual preview
K162
Brand: KEKO Pages: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Brand: Road Armor Pages: 5
Menabo KIT+1 MERAK Fitting Instructions Manual preview
KIT+1 MERAK
Brand: Menabo Pages: 8
PMT AS7.M100.001 User Manual preview
AS7.M100.001
Brand: PMT Pages: 16
Kia 2015 optima Quick Start Manual preview
2015 optima
Brand: Kia Pages: 5
Wallbox PLP1 Installation Manual preview
PLP1
Brand: Wallbox Pages: 21
Safe Fleet RVS-218629 Instruction Manual preview
RVS-218629
Brand: Safe Fleet Pages: 28
Curt Manufacturing 58987 Installation Manual preview
58987
Brand: Curt Manufacturing Pages: 4

Brands by name

Popular brands

Load more brands