manualshive.com logo in svg

Mercury 2003, Owner'S Manual

The Mercury 2003 Quick Reference Manual is a comprehensive user manual designed to provide quick and easy guidance for operating the Mercury 2003 model. With clear instructions and helpful illustrations, this manual is available for free download from our website manualshive.com, ensuring efficient usage and hassle-free navigation.

Share
Download
background image

ability, to the point where the ratchet/slip occurs, if possible. The spare
tire carrier will not allow you to overtighten. If the spare tire carrier
ratchets or slips with little effort, take the vehicle to your dealer for
assistance at your earliest convenience.

4. Check that the tire lies flat against the frame and is properly
tightened. Try to push or pull, then turn the tire to be sure it will not
move. Loosen and retighten, if necessary. Failure to properly stow the
spare tire may result in failure of the winch cable and loss of the tire.

5. If your vehicle is equipped with a spare tire lock and key, be sure to
install the spare tire lock into the bumper drive tube with the spare tire
lock key and jack handle.

6. Repeat this tightness check procedure when servicing the spare tire
pressure (every six months, per scheduled maintenance guide), or at any
time that the spare tire is disturbed through service of other
components.

Re-stowing the jack and tools

1. Unblock the wheels.

2. Replace beauty cap, stow the jack and tools in their respective
locations, making sure they are fully secured so they do not rattle when
you drive.

JUMP STARTING YOUR VEHICLE

The gases around the battery can explode if exposed to flames,
sparks, or lit cigarettes. An explosion could result in injury or

vehicle damage.

Batteries contain sulfuric acid which can burn skin, eyes and
clothing, if contacted.

Do not attempt to push-start your vehicle. Automatic
transmissions do not have push-start capability; also, the
catalytic converter may become damaged.

Roadside Emergencies

183

Summary of Contents for 2003










































































































































































































































































Reviews:

No comments

Related manuals for 2003

Panasonic SL-SX451C Operating Instructions preview
SL-SX451C
Brand: Panasonic Pages: 2
Panasonic CYRC50U - UNIVERSAL REAR-VIEW CAMERA Manual De Instrucciones preview
CYRC50U - UNIVERSAL REAR-VIEW CAMERA
Brand: Panasonic Pages: 20
Panasonic CF-WEB Series Setting Manual preview
CF-WEB Series
Brand: Panasonic Pages: 12
RaceChip Pro 2 Installation Manual preview
Pro 2
Brand: RaceChip Pages: 12
Cadillac 2012 Escalade Hybrid Manual preview
2012 Escalade Hybrid
Brand: Cadillac Pages: 90
BMW 3-series convertible Complete Vehicle Workbook preview
3-series convertible
Brand: BMW Pages: 98
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
HAUL MASTER 41782 Assembly And Operating Instructions Manual preview
41782
Brand: HAUL MASTER Pages: 8
Volvo 164 1969 Service Manual preview
164 1969
Brand: Volvo Pages: 266
VER-MAC PCMS Series Operation, Safety And Maintenance Manual preview
PCMS Series
Brand: VER-MAC Pages: 64
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
Yakima K896 Instructions Manual preview
K896
Brand: Yakima Pages: 12
Jeep CHEROKEE 2017 User Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 374
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Buick 2014 LaCrosse Manual preview
2014 LaCrosse
Brand: Buick Pages: 112
Road Ranger ET 210207 Installation Instruction preview
ET 210207
Brand: Road Ranger Pages: 3
TEINHOF P-038 Fitting And Operation Manual preview
P-038
Brand: TEINHOF Pages: 2

Brands by name

Popular brands

Load more brands