Mercury 2003 Owner'S Manual Download Page 126

Page: 126 / 265

Do not lean your head on the door. The Safety Canopy

娂

could

injure you as it deploys from the headliner.

Do not attempt to service, repair, or modify the Safety Canopy

娂

system, its fuses, the A, B, or C pillar trim, or the headliner on a

vehicle containing a Safety Canopy

娂

. See your Ford or Lincoln

Mercury dealer.

All occupants of the vehicle including the driver should always
wear their safety belts even when an air bag SRS and Safety

Canopy

娂

system is provided.

To reduce risk of injury, do not obstruct or place objects in the
deployment path of the inflatable Safety Canopy

娂

Seating and Safety Restraints

125

Summary of Contents for 2003










































































































































































































































































Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands

Mercury 2003, Owner'S Manual

Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands