Mercury 2003 Owner'S Manual Download Page 26

Page: 26 / 265

MP3 AUDIO SYSTEM

Balance:

Press

to shift

sound to the left/right speakers.

Fade:

Press

to shift

sound to the rear/front speakers.

Scan:

Press to hear a brief

sampling of all listenable radio
stations, CD or MP3 tracks. Press
again to stop.

CLK:

To set the clock press and

hold the CLK control for the
following functions:

•

To set the hour, press SEEK

control to decrease or increase

to the hours.

•

To set the minutes, press TUNE DIR

to decrease or increase

the minutes.

Release CLK to save the clock settings. Press CLK again to return the
display to radio mode.

Entertainment Systems

Summary of Contents for 2003










































































































































































































































































Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands

Mercury 2003, Owner'S Manual

Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands