Mercury 2003 Owner'S Manual Download Page 28

Page: 28 / 265

13.

Memory presets:

To set a station: Select frequency band AM/FM;

tune to a station, press and hold a preset button until sound returns.

14.

CD door:

Insert a CD with the

label side up.

15.

Tune/Directory:

Press TUNE

DIR

to change the radio

frequency down/up or change the
MP3 directories.

16.

Seek:

Press and release

SEEK

for previous/next

strong station selection or CD and
MP3 tracks.

17.

Power/volume:

Press to turn

ON/OFF; turn to increase or
decrease volume levels.

18.

CD:

Press CD to play a CD or

MP3 disc. When the MP3 disc is
loaded, CD and LOAD will appear
on the display. The display will
briefly show the total number of tracks on the disc as TXXX
(XXX=number of tracks).

19.

AM/FM:

Press to select a

frequency band in radio mode.

20.

Bass:

Press

decrease/increase the bass output.

Entertainment Systems

Summary of Contents for 2003










































































































































































































































































Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands

Mercury 2003, Owner'S Manual

Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands