Mercury 2003, Owner'S Manual

Page: 91 / 265

3. Press the 7
•
8 and the 9
•
0 at the same time. This must be done
within five seconds of completing step 2.
Your personal code is now erased and only the factory set 5–digit code
will work.
Anti-scan feature
If the wrong code has been entered 35 times, the keypad will go into an
anti-scan mode. This mode disables the keypad for one minute and the
keypad lamp will flash.
The anti-scan feature will turn off after:
•
one minute of keypad inactivity.
•
pressing the UNLOCK control on the remote entry transmitter.
•
the ignition is turned to the ON position.
•
a key turned to the UNLOCK position on the driver’s door (if the
vehicle is equipped with a perimeter anti-theft system).
Unlocking and locking the doors, liftgate and liftgate window using
keyless entry
To unlock the driver’s door, enter the factory set 5-digit code or your
personal code. Each number must be pressed within five seconds of each
other. The interior lamps will illuminate.
To unlock all doors and liftgate,
press the 3
•
4 control within five
seconds.
To open the liftgate window, press the 5
•
6 control within five
seconds.
To lock all doors, liftgate and liftgate window, press the 7
•
8 and
the 9
•
0 at the same time. Note: The driver’s door must be closed. You
do not need to enter the keypad code first.
Autolock
This feature will automatically lock all the doors when:
•
all the doors are closed,
•
the ignition key is in the ON position,
•
the gearshift lever is shifted into R reverse or a forward gear and
•
the brake pedal is released.
Locks and Security
90