Mercury 2003 Owner'S Manual Download Page 177

Page: 177 / 265

CHANGING THE TIRES

If you get a flat tire while driving:

•

do not brake heavily.

•

gradually decrease the vehicle’s speed.

•

hold the steering wheel firmly.

•

slowly move to a safe place on the side of the road.

The use of tire sealants is not recommended and may
compromise the integrity of your tires. The use of tire sealants

may also affect your tire pressure monitoring system (if equipped).

If your vehicle is equipped with a tire pressure monitoring
system, refer to

Tire Pressure Monitoring System (if

equipped)

in the

Maintenance and specifications

section for

important information. If the tire pressure monitor sensor becomes
damaged, it will no longer function.

Spare tire information

The spare tire can be used as a spare or a regular tire although the spare
wheel may not match the regular wheels.

If your vehicle is equipped with AWD, a spare tire of a different
size than the road tires should not be used. Such a tire could

make the vehicle difficult to control as well as result in damage to
driveline components.

Stopping and securing the vehicle

1. If you get a flat tire while driving,
do not apply the brake heavily;
instead, gradually decrease your
speed. Hold the steering wheel
firmly and slowly move to a safe
place on the side of the road.

2. Park on a level surface, activate
the hazard flashers and set the
parking brake.

3. Place gearshift lever in P (Park)
and turn engine OFF.

Roadside Emergencies

176

Summary of Contents for 2003










































































































































































































































































Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands

Mercury 2003, Owner'S Manual

Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands