Mercury 2003 Owner'S Manual Download Page 134

Page: 134 / 265

Installing child safety seats with combination lap and shoulder
belts

Air bags can kill or injure a child in a child seat.

NEVER

place a

rear-facing child seat in front of an active air bag. If you must

use a forward-facing child seat in the front seat, move the seat all the
way back.

Children 12 and under should be properly restrained in the rear
seat whenever possible.

1. Position the child safety seat in a
seat with a combination lap and
shoulder belt.

2. Pull down on the shoulder belt
and then grasp the shoulder belt
and lap belt together.

Seating and Safety Restraints

133

Summary of Contents for 2003










































































































































































































































































Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands

Mercury 2003, Owner'S Manual

Search results

Summary of Contents for 2003

Reviews:

Related manuals for 2003

Brands by name

Popular brands